Fujitsu DX8100 S2 Manual Do Utilizador
Chapter 10 Component Management
10.1 Component Status
10.1 Component Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
625
10.1.2
Controller Enclosure
Information of the CE is displayed.
■
Summary
The following items are displayed in the Main area:
•
Serial Number
The serial number of the CE is displayed.
The serial number of the CE is displayed.
•
Other Information
Additional information for the CE is displayed.
Additional information for the CE is displayed.
•
Location
The installation location of the thermal sensor is displayed.
The installation location of the thermal sensor is displayed.
-
Intake Temp
-
Exhaust Temp
•
Status
The status of thermal sensor is displayed.
The status of thermal sensor is displayed.
•
Error Code
The error code for thermal sensor is displayed.
The error code for thermal sensor is displayed.
•
Sensor 1
The internal temperature of CM#0 is displayed in Celsius (C) and in Fahrenheit (F).
If the thermal information is not available due to problem such as a sensor failure, a "-" (hyphen) is
displayed. This item is displayed only when using the ETERNUS DX80 S2/DX90 S2, the ETERNUS DX410 S2/
DX440 S2, or the ETERNUS DX8100 S2.
The internal temperature of CM#0 is displayed in Celsius (C) and in Fahrenheit (F).
If the thermal information is not available due to problem such as a sensor failure, a "-" (hyphen) is
displayed. This item is displayed only when using the ETERNUS DX80 S2/DX90 S2, the ETERNUS DX410 S2/
DX440 S2, or the ETERNUS DX8100 S2.
•
Sensor 2
The internal temperature of CM#1 is displayed in Celsius (C) and in Fahrenheit (F).
If the thermal information is not available due to problem such as a sensor failure, a "-" (hyphen) is
displayed. This item is displayed only when using the ETERNUS DX80 S2/DX90 S2, the ETERNUS DX410 S2/
DX440 S2, or the ETERNUS DX8100 S2.
The internal temperature of CM#1 is displayed in Celsius (C) and in Fahrenheit (F).
If the thermal information is not available due to problem such as a sensor failure, a "-" (hyphen) is
displayed. This item is displayed only when using the ETERNUS DX80 S2/DX90 S2, the ETERNUS DX410 S2/
DX440 S2, or the ETERNUS DX8100 S2.