Fujitsu DX8100 S2 Manual Do Utilizador
Chapter 11 System Management
11.2 Functions in the Action Area for System
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
783
→ A confirmation screen appears.
3
Click the [OK] button.
→ The specified E-mail notification setting is performed.
4
Click the [Done] button to return to the [Network] screen.
End of procedure
11.2.3.13 Setup Syslog
This function sets up external servers (Syslog server) for sending logs of events that are detected by the
ETERNUS DX Disk storage system.
Up to two Syslog servers can be registered.
ETERNUS DX Disk storage system.
Up to two Syslog servers can be registered.
The following events are sent as Syslogs:
•
All the notification target events that are configured using the procedure in
•
Logins and logouts from GUI and CLI
Click the [Send Test E-Mail] button to confirm that an E-Mail can be sent to the specified address. When
sending a test E-Mail, select "Enable" for the "Notification E-Mail" setting. Note that clicking [Set] button is
required when changing the parameters before sending a test E-Mail to enable the new settings.
sending a test E-Mail, select "Enable" for the "Notification E-Mail" setting. Note that clicking [Set] button is
required when changing the parameters before sending a test E-Mail to enable the new settings.