Fujitsu DX8100 S2 Manual Do Utilizador

Chapter 11  System Management
  11.2  Functions in the Action Area for System

ETERNUS Web GUI User’s Guide

Copyright 2013 FUJITSU LIMITED

P2X0-1090-10ENZ0

Click the [Done] button to return to the [Key Management] screen.

11.2.6.6

Create Key Group

This function creates a key group.
The key group combines all of the RAID groups that use the same key. One key group can be created in the
ETERNUS DX Disk storage system.

The procedure to create a key group is as follows:

Click [Create Key Group] in [Action].

Specify the parameters, and click the [Create] button.

Name
Input a key group name.
The key group name corresponds to "Serial Number", which is managed in the key server.
The following input conditions apply:

Up to 32 alphanumeric characters and symbols (underscore "_")

The first letter must be an alphabetic character

The key group cannot be created when a common key (*1) is not registered. Refer to 

 for details.

*1:

The common key for SEDs that are managed in the ETERNUS DX Disk storage system.

The key group can be created even when the key server is not registered.

The key group can be created even when communication with the key server is not available.

Register RAID groups that use the same key in the key group. Refer to 

 for details.

The RAID groups that are registered in the key group can be checked by using the [SED Key Group] screen. 
Refer to 

 for details.

There are two types of SED keys: a common key and a key that is managed in the key server. RAID groups 
that use the common key and RAID groups that use the key managed in the key server (RAID groups that 
are registered in the key group) can be created in the same storage system.

Specify a unique key group name that is different from the other storage systems that use the 
same key server.

Do not change the key group name after the key status changes to "Normal". The key status can 
be checked on the [Key Group] screen. Refer to 

 for details.