Fujitsu DX8100 S2 Manual Do Utilizador
Chapter 5 Volume Management
5.1 Volume Status
5.1 Volume Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
85
5.1.7
Bad Sector
The bad sector information is displayed.
The following items are displayed in the Main area:
•
No.
The volume number is displayed.
The volume number is displayed.
•
Name
The volume name is displayed.
When the volume type is WSV or when the volume is concatenated by LUN concatenation, "Volume name
(n/m)" (n: nth volume in the concatenation order, m: number of concatenated volumes) is displayed.
The volume name is displayed.
When the volume type is WSV or when the volume is concatenated by LUN concatenation, "Volume name
(n/m)" (n: nth volume in the concatenation order, m: number of concatenated volumes) is displayed.
Drives are not monitored for bad sectors when the drives configure the REC Disk Buffer.
•
When data for rebuild, copyback, or redundant copy is not read normally, bad sector information is
recorded.
recorded.
•
When a system message that indicates the detection of bad sector is displayed in the [Overview] screen
or when a "Bad data" event is notified by Host Sense or an SNMP Trap, use this screen to check the
detected bad sector.
Use the [Setup Event Notification] function to specify whether to perform event notification when a bad
sector is detected. Refer to
or when a "Bad data" event is notified by Host Sense or an SNMP Trap, use this screen to check the
detected bad sector.
Use the [Setup Event Notification] function to specify whether to perform event notification when a bad
sector is detected. Refer to
for details. Note that the
deletion of bad sector can be performed by a maintenance engineer who has the "Maintenance
Operation" policy.
Operation" policy.