Fujitsu DX8100 S2 Manual Do Utilizador
Chapter 11 System Management
11.2 Functions in the Action Area for System
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
876
11.2.8.4
Modify ECO Mode Schedule
This function modifies the ECO mode schedule.
Up to eight events can be specified for a single ECO mode schedule.
Up to eight events can be specified for a single ECO mode schedule.
The procedure to edit an ECO Mode schedule is as follows:
Procedure
1
Select the ECO mode schedule that is to be edited and click [Modify Schedule] in [Action].
2
Select the event that is to be modified and click the [Edit Event] button.
Disk operation time varies depending on the ECO mode schedule settings and disk access.
A disk is spun up even if it is outside of disk operation time in the following conditions:
A disk is spun up even if it is outside of disk operation time in the following conditions:
•
If disk access occurs while the disk motor is stopped:
The disk is immediately spun up and can be accessed within 1 - 5 minutes.
The disk is immediately spun up and can be accessed within 1 - 5 minutes.
•
If a disk is activated more than a set amount of times in a day:
A state of increased access frequency is assumed and the ECO mode will cease stopping the disk motor.
A state of increased access frequency is assumed and the ECO mode will cease stopping the disk motor.
•
To apply the modified ECO Mode schedule to RAID groups, refer to the procedure in
•
To apply the modified ECO Mode schedule to each Thin Provisioning Pool, refer to the procedure in