Fujitsu DX8100 S2 Manual Do Utilizador

Chapter 11  System Management
  11.2  Functions in the Action Area for System

ETERNUS Web GUI User’s Guide

Copyright 2013 FUJITSU LIMITED

P2X0-1090-10ENZ0

Click the [OK] button. 

→ Setting of the storage system name starts. 

Click the [Done] button to return to the [System Settings] screen. 

11.2.13.2 Modify Date and Time

This function sets the date/time and time zone (storage system location) of the internal clock in the ETERNUS
DX Disk storage system. 
The clock is used for checking the internal log of the ETERNUS DX Disk storage system and in the ECO mode,
etc. The time zone setting is used for the Remote Support function. 
This function is used when moving the ETERNUS DX Disk storage system to a new installation site, and/or
changing the system date/time. 
It is possible to setup the NTP server to automatically set the time. If the NTP server cannot be used, resetting
the time once a month is recommended. 

The procedure to set the date and time is as follows:

Click [Modify Date and Time] in [Action]. 

When using ECO mode, make sure to set the time/date correctly. 
If the date/time of the ETERNUS DX Disk storage system is wrong, processes for stopping and starting the disk 
motor cannot be performed in accordance with the ECO mode schedule.

When using the NTP server, the time modification method is the step mode (modify immediately). 

When using the NTP server, the ETERNUS DX Disk storage system is synchronized with the NTP server 
every three hours.