Fujitsu DX8100 S2 Manual Do Utilizador
Appendix B Status List
B.1 Device General Status
B.1 Device General Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
973
B.1.1
Device General Status (Detail)
The detailed information of the ETERNUS DX Disk storage system general status is displayed with an icon and
character strings in the [Storage] screen under the [Component] navigation.
The meaning of ETERNUS DX Disk storage system general status (detail) is described below.
character strings in the [Storage] screen under the [Component] navigation.
The meaning of ETERNUS DX Disk storage system general status (detail) is described below.
Device general status (detail)
Device general status
Description
Normal
(Green)
The ETERNUS DX Disk storage system is in normal
state.
state.
Maintenance
(Orange)
Components that are undergoing maintenance
exist in the ETERNUS DX Disk storage system.
Rebuild or copyback is being performed.
exist in the ETERNUS DX Disk storage system.
Rebuild or copyback is being performed.
Change Controlling CM
(Orange)
Changing of the controlling CM is required.
Pinned Data
(Yellow)
Pinned data is detected.
Warning
(Yellow)
A component requires preventive maintenance.
A bad sector is detected.
A bad sector is detected.
Error
(Red)
A component has an error.
Loop Down
(Red)
There is a SAS cascade that cannot access all of
the DEs due to an error.
the DEs due to an error.
Not Ready
(Red)
A failure is detected when starting or turning off
the ETERNUS DX Disk storage system. I/O from the
host cannot be received normally.
the ETERNUS DX Disk storage system. I/O from the
host cannot be received normally.
Subsystem Down
(Red)
The ETERNUS DX Disk storage system is in failed
status. I/O from the host cannot be received
normally.
status. I/O from the host cannot be received
normally.
Unknown
(Red)
A status other than the ones listed above.