Fujitsu MAX3036FC Manual Do Utilizador
Installation Requirements
4-10
C141-E234
4.3.2 Interface
connector
The connector for the Fibre Channel Loop is an unshielded SCA-2 connector which has two 20-
pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.10 shows the connector. See Appendix A
for signal assignments on the connector.
pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.10 shows the connector. See Appendix A
for signal assignments on the connector.
For details on the physical/electrical requirements of the interface signals, refer to Section 1.3
“Physical Requirements, Electrical Requirements” of the Fibre Channel Interface Specifications.
“Physical Requirements, Electrical Requirements” of the Fibre Channel Interface Specifications.
Figure 4.10 SCA2 type connector