Fujitsu DX400 Manual Do Utilizador
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
14
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
Chapter 1 Operation Screens
The ETERNUSmgr backend program, which is embedded in the ETERNUS DX400/DX8000
series, is used to display the status of, setup and maintain the ETERNUS DX400/DX8000 series.
This chapter describes how this may be done.
series, is used to display the status of, setup and maintain the ETERNUS DX400/DX8000 series.
This chapter describes how this may be done.
1.1
Initial Screen
When using an ETERNUS DX400/DX8000 series, you must always keep a careful watch on its
status to monitor the device. Use either the ETERNUSmgr frontend or other operation manage-
ment software. To start the initial screen, you should take different procedure, depending on the
monitoring method.
status to monitor the device. Use either the ETERNUSmgr frontend or other operation manage-
ment software. To start the initial screen, you should take different procedure, depending on the
monitoring method.
Two methods to manage ETERNUS DX400/DX8000 series are explained
in this guide. One is via the ETERNUSmgr frontend, and the other is to use
a Web browser to access the ETERNUSmgr backend program embedded
in the device.
Hereafter, "ETERNUSmgr" is generally used for all device management,
even those that use an ordinary Web browser.
in this guide. One is via the ETERNUSmgr frontend, and the other is to use
a Web browser to access the ETERNUSmgr backend program embedded
in the device.
Hereafter, "ETERNUSmgr" is generally used for all device management,
even those that use an ordinary Web browser.