Fujitsu DX400 Manual Do Utilizador

Página de 843
Chapter 5  Configuration Menu
 >
5.3  Thin Provisioning Management
ETERNUS DX400/DX8000 series ETERNUSmgr  User Guide Settings/Maintenance
266
Copyright 2010 FUJITSU LIMITED   
P2X0-0760-02ENZ0
5.3.2
Set Thin Provisioning Pool Parameters
This function sets the thresholds for notification of a Thin Provisioning Pool shortage. There are              
two thresholds for Thin Provisioning Pools: Caution and Warning.
This section describes how to set the Thin Provisioning Pool parameters.
Procedure
1
Click [Set Thin Provisioning Pool Parameters] under the Thin Provisioning 
Management in the [Configuration] menu.
→ The [Set Thin Provisioning Parameters (Notification Setting)] screen appears.
 for screen details.
When there are no Thin Provisioning Pools registered in the ETERNUS          
DX400/DX8000 series, the [Set Thin Provisioning  Pool  Parameters]       
function cannot be executed.
When Resource Domains are registered in the ETERNUS DX400/        
DX8000 series, Thin Provisioning Pools to which  the  thresholds  can  be          
set differ depending on the current user account. 
-
When logged on using a Total Administrator account, the thresholds         
of all the Thin Provisioning Pools that are assigned to Resource          
Domains can be set.
-
When logged on using a Resource Domain Administrator account,        
the thresholds of only the Thin Provisioning  Pools  that  are  assigned          
to the relevant Resource Domain and the Shared Resource can be          
set.
The  following  two  methods  are  available  for  notification  of  a  Thin          
Provisioning Pool shortage.
-
SNMP Trap
-
ETERNUS SF Storage Cruiser
If "Caution" or "Warning" is displayed in the status  field  of  notification,           
immediately expand disk drives.
If the thresholds of a Thin Provisioning Pool cannot be specified, a           
message to that effect is displayed. Click the  [OK]  button  to  return  to            
the [Menu] screen.