Fujitsu DX400 Manual Do Utilizador
Chapter 5 Configuration Menu
>
>
5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
401
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5
Click the [OK] button.
→ Returns to the [Menu] screen.
End of procedure
5.4.8
Set Host Response
On this screen, you can add, change, and/or delete the Host Response that is added to the
response information from the ETERNUS DX400/DX8000 series to the hosts.
With some hosts connected to the ETERNUS DX400/DX8000 series, their I/O device recogni-
tion, as well as that of error codes, may be different from the default ETERNUS DX400/DX8000
series Host Response. If the ETERNUS DX400/DX8000 series is connected to such a host,
problems may occur: the ETERNUS DX400/DX8000 series may not be recognized by the host,
or an error on the ETERNUS DX400/DX8000 series may not be handled properly in the host.
To avoid such a situation, [Set Host Response] offers a function by which the ETERNUS DX400/
DX8000 series freely changes Host Response in the ETERNUS DX400/DX8000 series for
responding to the host.
Change the Host Response setting only when hosts and the ETERNUS DX400/DX8000 series
are connected via FC-CA or iSCSI-CA. The allocation target for Host Response created with this
function varies, depending on [ON/OFF] status of the Host Affinity function.
response information from the ETERNUS DX400/DX8000 series to the hosts.
With some hosts connected to the ETERNUS DX400/DX8000 series, their I/O device recogni-
tion, as well as that of error codes, may be different from the default ETERNUS DX400/DX8000
series Host Response. If the ETERNUS DX400/DX8000 series is connected to such a host,
problems may occur: the ETERNUS DX400/DX8000 series may not be recognized by the host,
or an error on the ETERNUS DX400/DX8000 series may not be handled properly in the host.
To avoid such a situation, [Set Host Response] offers a function by which the ETERNUS DX400/
DX8000 series freely changes Host Response in the ETERNUS DX400/DX8000 series for
responding to the host.
Change the Host Response setting only when hosts and the ETERNUS DX400/DX8000 series
are connected via FC-CA or iSCSI-CA. The allocation target for Host Response created with this
function varies, depending on [ON/OFF] status of the Host Affinity function.