Fujitsu DX400 Manual Do Utilizador
Appendix A Screen Details
>
>
A.24 Set Sub System Parameters
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
773
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.24
Set Sub System Parameters
A.24.1
Set Sub System Parameters (Initial) Screen
On this screen, the status of sub system parameters set on the ETERNUS DX400/DX8000
series is displayed. Change the sub system parameters on this screen if necessary.
series is displayed. Change the sub system parameters on this screen if necessary.
■
Sub System Parameters
●
Setting item
•
Disable Load Balance
This sets [Suppressed/Not Suppressed] for sense response that requests host retry in an
overload situation in ETERNUS DX400/DX8000 series.
Check this checkbox if sense response does not request host retry. The default setting is "Not
Suppressed".
This sets [Suppressed/Not Suppressed] for sense response that requests host retry in an
overload situation in ETERNUS DX400/DX8000 series.
Check this checkbox if sense response does not request host retry. The default setting is "Not
Suppressed".
-
Checked: Suppressed (No response)
-
Not Checked: Not Suppressed (Respond)
•
The copy between Resource Domains is permitted
Select whether to [Permit / Do not permit] the Advanced Copy between Resource Domains.
The default setting is "Permit".
Select whether to [Permit / Do not permit] the Advanced Copy between Resource Domains.
The default setting is "Permit".
-
Checked:
Permit
Permit
-
Not checked:
Do not permit
Do not permit
This setting is available only when connecting with Open system host.
•
If [Disable Load Balance] is set to [Not Suppressed (Respond)], then
when the ETERNUS DX400/DX8000 series is overloaded, it returns
the [Load Balance Support] sense indicated in the [Set Host
Response] function to the host.
when the ETERNUS DX400/DX8000 series is overloaded, it returns
the [Load Balance Support] sense indicated in the [Set Host
Response] function to the host.
•
If connecting HP-UX system hosts to the ETERNUS DX400/DX8000
series, suppress warning sense, which is the response of the
ETERNUS DX400/DX8000 series under overload conditions, by
setting [Disable Load Balance] to [Suppressed (No response)]. If
[Disable Load Balance] is set to [Not Suppressed (Respond)],
inappropriate log may be recorded on the hosts.
series, suppress warning sense, which is the response of the
ETERNUS DX400/DX8000 series under overload conditions, by
setting [Disable Load Balance] to [Suppressed (No response)]. If
[Disable Load Balance] is set to [Not Suppressed (Respond)],
inappropriate log may be recorded on the hosts.
•
If [Disable Load Balance] is set to [Not Suppressed (No response)],
hosts connected to the ETERNUS DX400/DX8000 series (all hosts
including non-HP-UX) do not receive sense response even if the
ETERNUS DX400/DX8000 series is in overload status.
hosts connected to the ETERNUS DX400/DX8000 series (all hosts
including non-HP-UX) do not receive sense response even if the
ETERNUS DX400/DX8000 series is in overload status.
When logged on using a Resource Domain Administrator account, the
[The copy between Resource Domains is permitted] is not displayed.
[The copy between Resource Domains is permitted] is not displayed.