Fujitsu DX400 Manual Do Utilizador
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
Appendix A Screen Details
>
>
A.29 Set Eco-mode Schedule
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
786
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.29
Set Eco-mode Schedule
A.29.1
Set Eco-mode Schedule (Set) Screen
Set the Eco-mode schedule.
Up to eight Constantly Active Disk Terms can be set for one schedule to operate the Eco-mode.
Assign the created schedule to the RAID Groups or Thin Provisioning Pools to enable the Eco-
mode and activate the disk motor constantly during the specified term. Outside these times disk
activation/deactivation will occur in response to disk accesses.
Up to eight Constantly Active Disk Terms can be set for one schedule to operate the Eco-mode.
Assign the created schedule to the RAID Groups or Thin Provisioning Pools to enable the Eco-
mode and activate the disk motor constantly during the specified term. Outside these times disk
activation/deactivation will occur in response to disk accesses.
●
Setting item
•
Schedule Name
Enter a name for each Eco-mode schedule in the Schedule Name text box.
Up to 16 ASCII characters (0x20 – 0x7E) may be used.
Enter a name for each Eco-mode schedule in the Schedule Name text box.
Up to 16 ASCII characters (0x20 – 0x7E) may be used.
•
Radio button (Constantly Active Disk Term)
Select the target [Constantly Active Disk Term] to be deleted/copied/changed/changed the
order.
Select the target [Constantly Active Disk Term] to be deleted/copied/changed/changed the
order.
•
Radio button (Template)
Select the template for the constantly active disk term.
Select the template for the constantly active disk term.
-
Daily Template
-
Weekly Template
-
Specified Date Template
-
Specified Week Template
For details, see the description of each template.
For details, see the description of each template.
•
Daily Template
Select when adding/editing the constantly active disk term daily and set the start and end
time.
Select when adding/editing the constantly active disk term daily and set the start and end
time.
-
Start time: Hour can be set among 0 – 23 and minute can be specified as 00 or 30.
(Default: 0:00)
-
End time: Hour can be set among 0 – 23 and minute can be specified as 00 or 30.
(Default: 0:00)
Refer to the
.
Schedule Names already in use cannot be assigned. Entering a name is
not mandatory.
not mandatory.
•
If the specified end time is earlier than the start time, the end time is
set to the next day.
set to the next day.
•
The same time cannot be specified for start/end time.