Fujitsu DX410 S2/DX440 S2 Manual Do Utilizador
Chapter 5 Volume Management
5.2 Functions in the Action Area for Volume
5.2 Functions in the Action Area for Volume
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
145
The procedure to initialize an SDV is as follows:
Procedure
1
Select the SDV to be initialized (multiple selections can be made) and click [Initialize SDV]
in [Action].
in [Action].
→ A confirmation screen appears.
2
Click the [OK] button.
→ Initialization of the SDV starts.
3
Click the [Done] button to return to the [Volume] screen.
End of procedure
5.2.15
Encrypt Volume
This function encrypts existing volumes.
•
for details.
•
This function is used to prevent data leakage due to removal of disks, and cannot prevent data leakage
caused by server access.
caused by server access.
•
Encrypted volumes cannot be changed to non-encrypted volumes.
•
"Standard", "WSV", and "SDV" type volumes can be encrypted.
•
Canceling volume encryption is not possible.
•
This function cannot be used under the following conditions:
-
When a RAID group diagnosis is being performed
-
When a disk diagnosis is being performed
-
When firmware is being switched in hot mode
-
When disk firmware is being applied
-
When the status of the ETERNUS DX Disk storage system is other than "Normal"