Fujitsu DX410 S2/DX440 S2 Manual Do Utilizador

Chapter 9  Connectivity Management
  9.1  Connectivity Status

ETERNUS Web GUI User’s Guide

Copyright 2013 FUJITSU LIMITED

P2X0-1090-10ENZ0

9.1.8.9

FCoE Port QoS

This function displays the bandwidth limit and the performance information of the FCoE ports that are
registered in the ETERNUS DX Disk storage system.

The following items are displayed in the Main area:

Port
The location information of the target port is displayed.

Type
The type of the target port is displayed.

Bandwidth Limit
The maximum performance of the target port is displayed in IOPS (throughput value). If the bandwidth
limit has not been configured (the bandwidth has not been limited), "Unlimited" is displayed.

Performance Monitoring
Refer to 

 for details.

IOPS
Refer to 

 for details.

Throughput
Refer to 

 for details.

Delay Time
Refer to 

 for details.

The ports that are registered by the ETERNUS DX Disk storage system are displayed regardless of whether 
the ports belong to CA port groups or not.

This function displays the performance information that is obtained during performance monitoring 
regardless of whether the Host-LU QoS mode is enabled or disabled. When the performance information 
is displayed before performance monitoring is stopped, the performance information that was obtained 
up to this point is displayed. This function displays the performance information of each port.