Fujitsu DX410 S2/DX440 S2 Manual Do Utilizador
Chapter 11 System Management
11.1 System Status
11.1 System Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
722
11.1.5
Key Management
This function displays the setting parameters for the key server.
In this section, the SED authentication key is referred to as "key".
In this section, the SED authentication key is referred to as "key".
The following items are displayed in the Main area:
●
Key Management Machine Name
•
Key Management Machine Name
The name of the device that is connected to the key server is displayed. If the key management device
name is not specified, the field is blank.
The name of the device that is connected to the key server is displayed. If the key management device
name is not specified, the field is blank.
●
Key Server
•
Server ID
The key server ID is displayed.
The key server ID is displayed.
•
Domain Name / IP Address
The domain name (Fully Qualified Domain Name: FQDN) or the IP address for the key server is displayed.
Note that the IPv6 address is displayed as an abbreviation. Refer to
The domain name (Fully Qualified Domain Name: FQDN) or the IP address for the key server is displayed.
Note that the IPv6 address is displayed as an abbreviation. Refer to
for
details.
•
Port No.
The port number that is used to communicate with the key server is displayed.
The port number that is used to communicate with the key server is displayed.
•
LAN Port
The LAN port that is used to communicate with the key server is displayed.
The LAN port that is used to communicate with the key server is displayed.
-
MNT
-
RMT