Fujitsu DX410 S2/DX440 S2 Manual Do Utilizador
Chapter 11 System Management
11.2 Functions in the Action Area for System
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
880
11.2.9
Event/Dump Management
This section describes event/dump management.
Event/dump management provides the following functions:
Event/dump management provides the following functions:
11.2.9.1
Setup Event Notification
This function specifies whether to report events that are detected in the ETERNUS DX Disk storage system.
There are six methods for event notification: Host Sense Key Code Qualifier, SNMP Trap, E-Mail, syslog, REMCS
(for regions other than EMEA), and AIS Connect (for regions other than Japan).
A notification setting can be selected for each type of event.
There are six methods for event notification: Host Sense Key Code Qualifier, SNMP Trap, E-Mail, syslog, REMCS
(for regions other than EMEA), and AIS Connect (for regions other than Japan).
A notification setting can be selected for each type of event.
•
For SNMP Trap notification, performing procedures in
,
,
is required.
•
For E-Mail notification, performing procedure in
is
required.
•
For syslog notification, performing procedure in
is required.
•
For REMCS notification, performing procedure in
is required
(for regions other than EMEA).
•
For AIS Connect notification, performing procedure in
is required (for regions other than Japan).
•
When selecting REMCS for event notification, only the REC related error event settings can be changed.
•
In the following sections, "REMCS (for regions other than EMEA)" is referred to as "REMCS" and "AIS Con-
nect (for regions other than Japan)" is referred to as "AIS Connect".
nect (for regions other than Japan)" is referred to as "AIS Connect".