Fujitsu DX8700 S2 Manual Do Utilizador
Chapter 9 Connectivity Management
9.1 Connectivity Status
9.1 Connectivity Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
392
•
CA Port : Bandwidth Limit
-
CA Port
The location information of the CA port with the host affinity setting is displayed.
The location information of the CA port with the host affinity setting is displayed.
-
Bandwidth Limit
The maximum performance is displayed in IOPS (throughput value). If the bandwidth limit has not
been configured (the bandwidth has not been limited), "Unlimited" is displayed.
The maximum performance is displayed in IOPS (throughput value). If the bandwidth limit has not
been configured (the bandwidth has not been limited), "Unlimited" is displayed.
•
CA Port Group
If a CA port belongs to a CA port group, the CA port group name is displayed. If a host does not belong to a
CA port group, a "-" (hyphen) is displayed.
If a CA port belongs to a CA port group, the CA port group name is displayed. If a host does not belong to a
CA port group, a "-" (hyphen) is displayed.
•
LUN Group : LU QoS Group
-
LUN Group
The LUN group name is displayed. If the CLI command ("set mapping") is used for LUN mapping, a "- "
(hyphen) is displayed.
The LUN group name is displayed. If the CLI command ("set mapping") is used for LUN mapping, a "- "
(hyphen) is displayed.
-
LU QoS Group
The LU QoS group number is displayed. If a LU QoS group number is not configured, a "- " (hyphen) is
displayed.
The LU QoS group number is displayed. If a LU QoS group number is not configured, a "- " (hyphen) is
displayed.
•
For ETERNUS DX80 S2/DX90 S2/DX410 S2/DX440 S2/DX8100 S2: 0 - 543
•
For ETERNUS DX8700 S2: 0 - 2175
Click the [LUN Group : LU QoS Group] link to display a bandwidth limit on each LUN. Refer to
for details.
9.1.8.1
Host QoS (Basic)
Follow the message in the Information area to configure a bandwidth limit on each host.