Fujitsu MAP3147FC Manual Do Utilizador

7-4

C141-E163

Sense data (3-0C-03), (4-40-xx), (4-44-xx), and (4-C4-xx) indicate one of the following:

•

 

A target sector could not be detected using the sector counter.

•

 

A seek process overran the specified time.

•

 

A write to a disk terminated abnormally.

•

 

An error occurred in power-on self-diagnosis.

•

 

A hardware error occurred inside IDD.

•

 

A drive error occurred.

The symptoms above are generally caused by an error in a PCA or DE.

For details of the sense data above, refer to the Fibre Channel Interface Specifications.

If sense data (1-1x-xx), (3-1x-xx) or (E-1D-00) occurs frequently in a specific block of a disk, there
is disk damage that was not recorded in the media defect list.  In this case, assign an alternate block
to the error-detected block using a REASSIGN BLOCKS command.  For an explanation of the
REASSIGN BLOCKS command, refer to the Fibre Channel Interface Specifications.

If this error occurs in different blocks, a PCA or DE is faulty.

For details of the above sense data, refer to the Fibre Channel Interface Specifications.

Sense data (5-2x-xx), (5-3D-00), (B-47-xx), (B-49-00), (B-4D-xx) and (B-4E-00) indicates one of
the following symptoms:

•

 

An  invalid  or  unsupported  command  was  issued,  or  invalid  or  unsupported  parameters  were
specified.

•

 

A SCSI error occurred.

•

 

A CRC error occurred in the fibre channel loop.

If this error occurs, a PCA or the fibre channel interface is faulty.

For details of the above sense data, refer to the Fibre Channel Interface Specifications.