Fujitsu MAB3045 Manual Do Utilizador

C141-E035-03EN

3 - 10

The size of the usable area for storing user data on the IDD (format capacity) varies according
to the logical data block or the size of the spare sector area.  Table 3.4 lists examples of the
format capacity when the typical logical data block length and the default spare area are used.
The following is the general formula to calculate the format capacity.

[Number of sectors of each zone] = [number of sectors per track 

×

 number of tracks (heads) –

number of alternate spare sectors per cylinder] 

×

 [number of cylinders in the zone]

[Formatted capacity] = [total of sectors of all zones] – [number of sectors per track in last zone

×

 number of tracks (heads) 

×

 number of alternate cylinders] 

÷

 [number of physical sectors in

logical block] 

×

 [logical data block length]

The following formula must be used when the number of logical data blocks are specified with
the parameter in the MODE SELECT or MODE SELECT EXTENDED command.

[Format capacity] = [logical data block length] 

×

 [number of logical data blocks]

The logical data block length, the maximum logical block address, and the number of the
logical data blocks can be read out by a READ CAPACITY, MODE SENSE, or MODE
SENSE EXTENDED command after initializing the disk medium.

Model

Data heads Data block length

User blocks

Format capacity (GB)

MAA3182xx

19

35,680,750

18.2

MAB3091xx

10

17,824,700

9.1

MAB3045xx

5

512

8,895,370

4.55

MAC3091xx

10

17,871,600

9.1

MAC3045xx

5

8,918,420

4.55

Total number of spare sectors is calculated by adding the number of spare sectors in each
primary cylinder and the number of sectors in the alternate cylinders.