Fujitsu DX90 S2 Manual Do Utilizador
Chapter 2 ETERNUS DX Disk Storage System Installation
2.3 Package Size
2.3 Package Size
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning-
Copyright 2013 FUJITSU LIMITED
P3AM-4822-12ENZ0
35
2.3
Package Size
The ETERNUS DX Disk storage system is shipped in cardboard boxes. These boxes may not fit through some
doorways or elevators. To make sure that the ETERNUS DX Disk storage system can be moved to the
installation site, carefully check the transport route information. Refer to
doorways or elevators. To make sure that the ETERNUS DX Disk storage system can be moved to the
installation site, carefully check the transport route information. Refer to
for the maximum weight of each enclosure.
The following table shows the package size and the maximum package weight of each component for regions
other than EMEA&I.
other than EMEA&I.
Table 2.3 Package size (for regions other than EMEA&I)
*1: When an order for optional drives to be installed in the factory is placed, enclosures are shipped with the drives
preinstalled. When optional drives are ordered without preinstallation, each drive is shipped in an individual
package.
package.
Component
Package size (W × D × H)
Maximum weight (approx.)
Controller enclosure
2.5" type
600 × 760 × 240mm
40kg
3.5" type
600 × 780 × 240mm
40kg
Drive enclosure
2.5" type
600 × 660 × 240mm
40kg
3.5" type
600 × 670 × 240mm
40kg
Drive (*1)
2.5"
160 × 278 × 106mm
0.5kg
3.5"
189 × 300 × 116mm
1.0kg
Power distribution unit
1U
570 × 710 × 160mm
4kg
2U
(390 × 590 × 180mm) × 2
(7kg) × 2