Fujitsu DX8100 S2/DX8700 S2 Manual Do Utilizador

ETERNUS Web GUI User’s Guide

Copyright 2013 FUJITSU LIMITED

P2X0-1090-10ENZ0

Appendix I  

Storage Migration Setting Files

This chapter describes Storage Migration setting files.

I.1

Template File for Storage Migration Settings

The following table shows the details of a template file for storage migration settings.

Keyword

Number of 

settings

Allowed input

Type

Specify the type of Storage Migration. 
(Example) Type = Open

1

Open

GROUP

Specify a path group for each source storage system. 
Up to 16 path groups can be specified. 

New format
Specify "0x" (2-digit) + 0 - F (1-digit) with hexadecimal 
numbers.
[Example] GROUP=0x0

Old format
Specify 0 - F (1-digit) with hexadecimal numbers.
[Example] GROUP=0

1

New format
0x0 - 0xF
("0x" + 1-digit 
hexadecimal)

Old format
0 - F
(1-digit hexadecimal)

OPE-
MODE

[New format only]
Specify one of the operation modes (M/M+QC/
M+FC/QC/FC) for the Storage Migration.
The following symbols are used for the operation 
modes:

M: Migration
M+QC: Migration + Quick Compare
M+FC: Migration + Full Compare
QC: Quick Compare
FC: Full Compare

OPEMODE can be omitted. When this parameter is 
not specified, "Migration" is used.
Refer to 

 for details.

[Example] OPEMODE=M+QC

OPEMODE is available only when using a template 
file with the new format. When a template file 
with an old format is used, the conventional mode 
("Migration") is used.

1

M
M+QC
M+FC
QC
FC