GE LTC MAP Manual Do Utilizador
Section 3: Installation
3-21
70055MP Revision D
February 3, 2000
Serial Port Communications
To establish communications via the front panel serial port:
1. Be sure the modem, if installed, is disconnected at J8.
2. Be sure the SAGE
host software is installed on the personal
computer.
3. Connect a null modem cable between the front panel serial port and the
serial port on the personal computer. See Figure 3-10 for serial port
location.
4. From within the SAGE
host software, set the serial port rate to 19200
bps.
Figure 3-10: Serial Port Location