Adaptec SC4100 Manual Do Utilizador

A fully loaded enclosure is heavy. Reduce the weight 

of the enclosure by removing the drive carriers before 
installing the enclosure in the rack or tower. (You can also 
remove the two APCs to further reduce the weight, if 
required. See the Adaptec Storage Enclosure Installation and 
User’s Guide on the CD for instructions.)

To prevent personal injury, have someone assist you 

during rack installation.

If you are installing your enclosure in a rack, prevent 

personal injury and equipment damage by following the rack 
manufacturer’s safety instructions. Install your enclosure only 
in a rack that has been properly secured in an area with 
suitable environmental conditions.

Mounting rails for rack installation are sold separately. 

To purchase a rail kit, see your Adaptec reseller.

Required tools:

■

Phillips-head screwdriver

■

Wrench for tightening nuts (if your rack does not have threaded 
holes)

If you are not installing your Storage Enclosure into a rack or 
tower, skip to 

■

To install your Storage Enclosure into an rack, see 

.

■

To install your Storage Enclosure into a tower assembly, see