Primera Technology 510212 Manual Do Utilizador

Section 4: Ribbon and Print Media

Digital Label Press 3 User’s Manual

NOTE: Although the #300-Series Black UL-Recognized Ribbon provides maximum printquality

when printing onto #300-Series Polyesters, you may also achieve acceptable results by

using the variety of other #300-Series Resin Ribbons with the polyester materials. If doing

so, increase the Intensity setting within the printer driver setup window (see Section 6-D).

Note that print quality may vary when using the standard resin ribbons with the polyester

materials and, therefore, is not guaranteed.

IMPORTANT! Always seal print media in its original packaging and place on a smooth, flat

surface when not in use. Do not stack objects on top of the print media or place

more than 500 sheets in a single stack. Print media must not be exposed to excess

dust, heat, direct sunlight, or moisture and must not be allowed to curl or bend.

F. LOADING THE PRINT MEDIA ROLL INTO THE PRESS

Your press uses media on a proprietary roll. The core of the media roll contains a

chip that stores important information which is displayed on the LCD panel. This

system allows the user to identify the type of media on the roll as well as the

number of prints remaining on the roll by simply looking at the LCD display

panel.
Refer to the following steps to load print media into the supply tray:

1. Pull the Media Roll Release Lever downward.

Media Roll Release Lever

Impressa3.qxd 10/22/01 9:29 PM Page 23