Kathrein DCM 42 Manual Do Utilizador

 

24 

For operation of the cable modem the following 
conditions need to be satisfied: 
Broadband cable connection with backward 
channel, 
Network-compatible PC (Ethernet 10/100Base-T 
or USB 1.1). 

When connecting the cable modem, follow the 
steps below in order, see wiring diagram on page 
29. 

•  Connect the RF input (2) of the modem to the 

antenna socket. Make certain beforehand that 
the socket has backward channel capability, 
e.g. Kathrein ESM 30. 

•  For the connection use a coaxial cable with F-

type connector plugs. 

•  The connecting cable must have CE confor-

mity and exhibit a shielding factor in compli-
ance with class A of >85 dB (e.g. Kathrein 
ETG 15 / ETG 30).  

•  Connect the power adapter to the D.C. volt-

age input (1) - DC IN 12 V - and to the mains 
supply. 

Use a) the Ethernet or b) the USB connection. 

a)  Connect the 10/100Base-T Ethernet connec-

tions with one another.(Western socket) of 
your PC and those of the cable modem (3). 

b)  Read the readme file on the USB Driver CD-

ROM and make sure that your operating sys-
tem is supported. When installing the USB 
connection (4) follow the instructions from the 
Readme file. 

Get in touch with your relevant cable network