Toshiba M100 Manual Do Utilizador

8-14

Satellite M100

Optional Devices

Removing Memory Under Keyboard

To remove the memory module, make sure the computer is in boot mode
then:
1. Be sure the power is off and all cables are disconnected from the

computer.

2. Remove the battery, keyboard cover, keyboard, and loosen the shield

cover screws which is securing the memory module socket.

3. Slide your fingernail or a thin object under the cover and lift it off.
4. Push the latches to the outside to release the module. A spring will force

one end of the module up.

5. Grasp the module and pull it out.

Removing memory module

6. Seat the shield cover and secure it with screws.
7. Connect the keyboard cable with the system board and secure it with

screws.

8. Replace the keyboard cover and battery.

If you use the computer for a long time, the memory modules will become
hot. In this case, let the memory modules cool to room temperature before
you replace them.

Do not try to remove a memory module with the computer turned on. You
can damage the computer and the module.

Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.

M2XA