Toshiba M100 Manual Do Utilizador

Troubleshooting

The following message 
is displayed on the 
LCD:
RTC battery is low or 
CMOS checksum is 
inconsistent. Press 
[F2]

 key to set Date/

Time. 

The RTC battery charge has become exhausted, 
you should set the date and time in within the 
BIOS setup screen through the following steps:
1. Press [F1] key. BIOS setup will boot up.
2. Press [F2] to set the date in [System Date].
3. Press [F2] to set the time in [System Time].

Reading of the 
fingerprint was not 
successful.

Please try again using the correct posture. Refer 
to Using the Fingerprint Sensor in Chapter 4, 
Operating Basics.
Try the recognition process again using another 
enrolled finger.

The fingerprint cannot 
be read due to injuries to 
the finger.

Try the recognition process again using another 
enrolled finger.
If fingerprints from all the enrolled fingers cannot 
be read, please logon by using the keyboard to 
input the password for the time being.
If problems persist, contact your dealer.

Fingerprint Power on 
Security or Single Sign 
On feature cannot be 
enabled.

Please use TOSHIBA Password Utility to register 
the User Password if it was not registered.

Fingerprint Power on 
Security does not work

1. Make sure you have enroll finger in windows 

account.

2. Set the User Password by using TOSHIBA 

Password Utility and restart the system.

3. Make sure  place a checkmark in Replace the 

 on the Protector Suite 

QL setting.