Toshiba M100 Manual Do Utilizador

This product was designed to fulfill the EMC (Electromagnetic Compatibility) 
requirements for "residential, commercial and light industry environments".
The following environment is not approved:

■

Industrial Environments (e.g. environments where a with a mains voltage 
of 380V threephase is being used).

In the following environments the use of this product can be restricted:

■

Medical Environments: This product is not certified as a medical product 
according to the Medical Product Directive 93/42/EEC, but can be used 
in office areas where the use is not restricted. Please disable the wireless 
LAN or Bluetooth hardware in such areas as long this feature is not 
official supported by the operator of the related medical facility.

■

Vehicle Environments: Please read operator’s manual of the vehicle 
manufacturer for further restrictions of use.

■

Aircraft Environments: Please following the advices of the flight 
personnel regarding restrictions of use.

Any consequences resulting from the use of this product in working 
environments that are not approved or the use is restricted are not the 
responsibility of Toshiba Corporation. The consequences of the use of this 
product in those working environments may be:

■

Interference with other devices or machines in the nearby surrounding 
area

■

Malfunction of, or data loss from, this product caused by disturbances 
generated by other devices or machines in the nearby surrounding area

Furthermore, for general safety reasons, the use of this product in 
environments with explosive atmospheres is not permitted.

If this product has networking capabilities and will be connected to a 
network, Class A radiation limits will be observed (in accordance with 
technical conventions). This means that if the product will be used in a 
domestic environment, other devices in the near surrounding area may 
suffer interference. Consequently, please do not use this product in such 
environments (for example a living room), otherwise you could be held 
responsible for any ensuing interference.

Even if your software gives no indication that any problems have occurred, 
you should always check to ensure that information has been successfully 
stored on recordable optical media (CD-R, CD-RW and so forth).