Alienware 17 R1 Manual Do Utilizador

Replacing the Display Assembly    |   

 

information that shipped with your computer and follow the steps in 
"Before Working Inside Your Computer" on page 11. After working 
inside your computer, follow the instructions in "After Working Inside 
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance 
home page at dell.com/regulatory_compliance.

Align the screw holes on the display assembly with the screw holes on the 
computer base.

Replace the screws that secure the display assembly to the computer base.

Connect the display cable, display mini-card cable, and display-light board cable 
to the system board.

Close the display and turn the computer over.

Route the antenna cables through their routing guides on the computer base.

Replace the screws that secure the display assembly to the computer base.

Connect the antenna cables to the wireless mini-card.

Replace the video card. See "Replacing the Video Card" on page 44.

Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on 
page 42.

Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.

Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.

Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on 
page 30.

Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on 
page 26.

Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.

Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on 
page 20.

Replace the base cover. See "Replacing the Base Cover" on page 15.

book.book  Page 98  Friday, June 28, 2013  3:27 PM