Verizon 7500 Manual Do Utilizador

 

 

 

 
 

030-300536 Rev. A 

17 

     August 2007 

 
This section explains how to install the USB drivers for your Router. If you are using only an Ethernet connection, 
USB driver installation is not necessary. The Microsoft Plug and Play auto-detect feature recognizes when new 
hardware has been installed. After you connect the Router to the PC, the Router will be detected automatically. 
 
IMPORTANT: Make sure that the CD-ROM provided with your kit is inserted into the PC’s CD-ROM drive before 
you connect the blue USB cable to the Router and the PC, as explained in section 6.1.4, “Connecting VersaLink via 
USB.” 
 
Determine which operating system is installed on your PC, and then follow the USB driver instructions that match 
your operating system. The following table provides a reference to the USB driver installation instructions. After 
you have completed the USB driver installation, return to section 6.1.4 to complete the USB hardware installation 
instructions.  
 

Your Operating System 

Refer to this section for USB driver instructions 

Windows 98 SE 

7.1 Installing the USB Driver for Windows 98 SE 

Windows ME 

7.2 Installing the USB Driver for Windows ME 

Windows 2000 

7.3 Installing the USB Driver for Windows 2000 

Windows XP 

7.4 Installing the USB Driver for Windows XP 

Windows Vista™ 

7.5 Installing the USB Driver for Windows Vista™ 

 
 

 
IMPORTANT: Confirm that the CD-ROM provided with the Router kit is inserted into the PC’s CD-ROM drive 
before beginning this installation.  
 
1.  Windows 98 SE: After you connect the Router to your PC, the Found New Hardware window will appear 

(Figure 1). After a brief delay, the Add New Hardware Wizard window will appear (Figure 2) Click Next.