Raritan Computer EMX2-111 Manual Do Utilizador
104
In This Chapter
Access Security Control ........................................................................ 104
Setting Up an SSL Certificate ................................................................ 118
Setting Up LDAP Authentication ........................................................... 123
Enabling and Editing the Security Banner (Restrictive Service Agreement
Banner) .................................................................................................. 129
Setting Up an SSL Certificate ................................................................ 118
Setting Up LDAP Authentication ........................................................... 123
Enabling and Editing the Security Banner (Restrictive Service Agreement
Banner) .................................................................................................. 129
Access Security Control
The EMX provides tools to control access. You can require HTTPS
encryption, enable the internal firewall and create firewall rules, and
create login limitations.
encryption, enable the internal firewall and create firewall rules, and
create login limitations.
Tip: You can also create and install the certificate or set up external
authentication servers to control any access. See
authentication servers to control any access. See
Setting Up an SSL
Certificate
(on page 118) and
Setting Up LDAP Authentication
(on
page 123).
Forcing HTTPS Encryption
HTTPS uses Secure Sockets Layer (SSL) technology to encrypt all traffic
to and from the EMX device so it is a more secure protocol than HTTP.
to and from the EMX device so it is a more secure protocol than HTTP.
You can force users to access the EMX web interface through the
HTTPS protocol only. By default, this protocol is enabled.
HTTPS protocol only. By default, this protocol is enabled.
To force HTTPS access to the web interface:
1. Choose Device Settings > Security > Force HTTPS for Web Access.
2. A message appears, prompting you to confirm the operation. Click
Yes to enforce the HTTPS service.
3. Choose Device Settings > Security to verify the "Force HTTPS for
Web Access" checkbox is selected as shown in this diagram.
If the checkbox is not selected, repeat these steps.
After enabling the HTTPS protocol, all access attempts using HTTP are
redirected to HTTPS automatically.
redirected to HTTPS automatically.
Chapter 6 Security