Raritan Computer EMX2-111 Manual Do Utilizador
Chapter 2: Installing and Configuring the EMX Device
9
Mount the device by screwing a mounting button in the back
center of each L-bracket and then having both buttons engage
the mounting holes in the rack. The recommended torque for the
button is 1.96 N·m (20 kgf·cm).
the mounting holes in the rack. The recommended torque for the
button is 1.96 N·m (20 kgf·cm).
Mounting a 1U EMX Device
Using the appropriate brackets and tools, fasten the 1U EMX device to
the rack or cabinet.
the rack or cabinet.
To mount the 1U EMX device:
1. Attach one rackmount bracket to one side of the EMX device.
a. Align the oval-shaped holes of the rackmount bracket with the
threaded holes on one side of the EMX device.
b. Secure the rackmount bracket with Raritan-provided screws.
Note: The appropriate oval-shaped hole locations of the rackmount
bracket may vary according to the threaded holes on you model.
bracket may vary according to the threaded holes on you model.
2. Repeat Step 1 for securing the other rackmount bracket to the other
side of the EMX.