Raritan Computer EMX2-111 Manual Do Utilizador
Chapter 10: Using the Command Line Interface
233
Setting the Z Coordinate Format for Environmental Sensors
This command syntax enables or disables the use of rack units for
specifying the height (Z coordinate) of environmental sensors.
specifying the height (Z coordinate) of environmental sensors.
config:#
emd externalSensorsZCoordinateFormat <option>
Variables:
<option> is one of the options: rackUnits or freeForm.
Option
Description
rackUnits
The height of the Z coordinate is measured in
standard rack units. When this is selected, you
can type a numeric value in the rack unit to
describe the Z coordinate of any environmental
sensors.
standard rack units. When this is selected, you
can type a numeric value in the rack unit to
describe the Z coordinate of any environmental
sensors.
freeForm
Any alphanumeric string can be used for
specifying the Z coordinate.
specifying the Z coordinate.
Note: After determining the format for the Z coordinate, you can set a
value for it. See
value for it. See
Setting the Z Coordinate
(on page 283).
Example
The following command determines that the unit of rack is used for
specifying the Z coordinate of environmental sensors.
specifying the Z coordinate of environmental sensors.
config:#
emd externalSensorsZCoordinateFormat rackUnits
Enabling or Disabling Data Logging
This command syntax enables or disables the data logging feature.
config:#
emd dataRetrieval <option>
Variables:
<option> is one of the options: enable or disable.
Option
Description
enable
Enables the data logging feature.
disable
Disables the data logging feature.