Raritan Computer EMX2-111 Manual Do Utilizador
Chapter 5: EMX Device Management
73
4. Click OK to save the changes.
Displaying the Device Information
The Device Information dialog displays information specific to the EMX
device that you are accessing, such as IDs and protocol versions of
asset sensors.
device that you are accessing, such as IDs and protocol versions of
asset sensors.
To display the device information:
1. Choose Maintenance > Device Information. The Device Information
dialog appears.
2. Click the tab containing the information you want to view.
Tab
Information shown
Device Information
General device information, such as model
name, serial number, firmware version,
hardware revision, and so on.
name, serial number, firmware version,
hardware revision, and so on.
Asset Strips
Each asset sensor's ID, boot version,
application version and protocol version.
application version and protocol version.
3. Enlarge the dialog if necessary.
4. You can re-sort the list or change the columns displayed.
5. Click Close to quit the dialog.
Tip: The firmware version is also available by clicking the EMX folder in
the EMX Explorer pane.
the EMX Explorer pane.
Setting the Date and Time
Set the internal clock on the EMX device manually, or link to a Network
Time Protocol (NTP) server and let it set the date and time for the EMX.
Time Protocol (NTP) server and let it set the date and time for the EMX.
To set the date and time:
1. Choose Device Settings > Date/Time. The Configure Date/Time
Settings dialog appears.
2. In the Time Zone field, click the drop-down arrow, and select your
time zone from the list.
3. If the daylight saving time applies to your time zone, verify the
Automatic Daylight Saving Time Adjustment checkbox is selected.
If the daylight saving time rules are not available for the selected time
zone, the checkbox is not configurable.
zone, the checkbox is not configurable.
4. Choose one of the methods to set the date and time: