RTS DKP 16 CLD Manual Do Utilizador

Assignment of keys with auto functions is described in the programming section that follows.

Operation of keys with auto functions, is as follows:

Talk and listen can be activated separately. The listen assignment listens to whatever is 
assigned to the talk key.

Both talk and listen activates when talk is activated.

Listen turns OFF when talk is activated.

Listen is always ON and talk may be turned ON or OFF

If an IFB talk key has an auto table listen assignment, talk and listen is independently 
activated. The listen key listens to whatever is defined as the IFB Listen Source for the IFB 
assigned to the talk key.

Activating this key activates all keys to the left of it (up to, but not including another all call 
key).

If a point-to-point key has the DIM function as a level 2 talk assignment, activating the key 
causes the crosspoint levels to diminish for any other intercom ports currently listening to the 
same destination and are in the same DIM tables.

Activating the master key in a key group activates all keys in the group according to each key’s individual key assignment. 
Activating a slave key does not affect any other keys in the group (see “Key Options Menu, Key Groups” on page 102).

Activating a key with the solo option causes all other keys to turn OFF until the solo key is turned OFF. For more information, 
see “Key Options Menu, Latching” on page 103.

Activating any talk key causes the speaker or headphone volume at the keypanel to diminish by the amount specified in the 
Dim menu item on the Service menu (see, “Audio Options Menu, Dim” on page 50).

Do not confuse this with the Talk+DIM auto function previously described. Talk+DIM affects the speaker or 

headphones on other keypanels when a particular talk key is activated on the keypanel. Speaker DIM affects the 
speaker or headphone level on the keypanel when any talk key on the keypanel is activated.