Adder Technology AV Series Manual Do Utilizador

Connections to the AdderLink AV modules do not need to follow the precise 
order given in this user guide although it is recommended that you do not apply 
power to the modules until all other connections have been made.
Note: Unless stated otherwise, all connection information given here applies to 
all modules in the AdderLink AV family.  

1  Attach a video cable of suitable type and length (fully shielded with 15 way 

male D-type connectors at both ends, 2m or less - Adder part number: 
VSC18) to the socket labelled 

 on the AdderLink AV transmitter.

2  Attach the other end of the video cable to the appropriate VGA 

video output socket on the source PC system.

3  Attach a stereo audio cable (shielded with three way 

3.5mm jack plugs at both ends - Adder part 
number: VSC22) to the socket labelled 

 on 

the AdderLink AV transmitter.

4  Attach the other end of the stereo 

audio cable to the appropriate 
audio output socket on the 
source PC system.

To connect a monitor and speakers
The video and audio out ports of the AdderLink AV transmitter can optionally be 
used either to: 

•  Attach a monitor and/or speakers in the vicinity of the source PC system 

– See below, 

   or

•  Make a cascade link to another transmitter module – Please refer to the 

section 

.

1  Attach the video cable from the monitor to the socket labelled 

 

on the AdderLink AV transmitter.

2  Attach the stereo audio cable from the speakers to 

the socket labelled 

 on the AdderLink AV 

transmitter.