Little Wonder G-4100 Manual Do Utilizador

ZyAIR G-4100 

5 

 

 

PRINTER  

Use the printer cable to connect an “exclusive printer” to this port. 

LAN 1-4 

These ports are auto-crossover, (”auto MDI/MDI-X”) which means you can use either a 
straight-through or crossover Ethernet cable to connect the ZyAIR to a computer or a hub. 

WAN 

Connect your broadband modem to this port with the Ethernet cable that came with your 
modem. 

RESET 

You only need to use this button if you’ve forgotten the ZyAIR’s password. It returns the 
ZyAIR to the factory defaults (password is 1234, LAN IP address 192.168.1.1). 

POWER 5VDC 

After you’ve made the above connections, connect the ZyAIR’s included power adaptor to 
the ZyAIR’s power socket. Use only the included power adaptor. The PWR LED turns on. 
The LAN and WAN LEDs flash and then turn on if they have proper connections. The 
ZyAIR LED turns on for 20 seconds and then turns off. The SYS LED turns on. The ZyAIR 
LED turns back on and blinks if the wireless connection is active.