2WIRE 3801HGV Manual Do Utilizador
Configuring Firewall Settings
73
HomePortal 3801HGV Gateway User Guide
Configuring Firewall Settings
Refer to the following table to understand the parameters listed on the Firewall Status page:
Configuring Firewall Settings
Objective
To configure firewall settings in a way that special applications running on computers inside your
home network are granted Internet access.
home network are granted Internet access.
To grant internet access to special applications, you need to open firewall pinholes and associate
the intended application(s) with a computer connected to your gateway. If you cannot find a listing
for your application, you can define an application with the protocol and port information. Also, you
can delete the application profile you have saved. By default, firewall provides maximum protection
and blocks unsolicited inbound traffic.
the intended application(s) with a computer connected to your gateway. If you cannot find a listing
for your application, you can define an application with the protocol and port information. Also, you
can delete the application profile you have saved. By default, firewall provides maximum protection
and blocks unsolicited inbound traffic.
Steps
1. Navigate to Settings > Firewall > Applications, Pinholes and DMZ. The Allow device
application traffic to pass through firewall page appears.
Parameter
Description
Firewall Status
View whether firewall is enabled or disabled in this section.
Current Applications, Pinholes
and DMZ Settings
and DMZ Settings
View if any applications are hosted in this section.
Device
Displays the name of the configured devices.
Allowed Applications
Displays the name of the application that bypasses the firewall settings.
Application Type
Displays the type of application.
Protocol
Displays the protocol in use.
Port Number(s)
Displays the port number assigned to the application.
Public IP
Displays the IP assigned to the device.