Enterasys Networks 1H582-xx Manual Do Utilizador
SNMP Command Set
Configuring SNMP Users, Groups and Communities
5-25
Command Mode
Read-Only.
Example
This example shows how to display SNMPv3 information about the “public” community name:
5.2.2.11 set snmp community
Use this command to create a relationship between an SNMP v1 or v2 community name and an
SNMPv3 access policy.
SNMPv3 access policy.
set snmp community {name user username} [volatile | nonvolatile]
Syntax Description
Command Defaults
If storage type is not specified, nonvolatile will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Matrix>show snmp community public
Community Name: public
Security User Name: initial-restricted
SNMP Engine ID: 80:00:38:18:03:00:01:f4:d2:bc:80
Storage Type: nonvolatile
Row Status: active
name
Specifies a community name.
user username
Specifies the SNMPv3 user name to which this
community name will be mapped. For details on creating
an SNMP v3 user, refer to
community name will be mapped. For details on creating
an SNMP v3 user, refer to
volatile |
nonvolatile
nonvolatile
(Optional) Specifies the storage type for these entries.