Philips SNB6500 Manual Do Utilizador
Your Wireless Router
EN
7
Wireless Base Station 11g True Turbo
1
2
3
4
Wireless
Internet Modem
Power
Light
Status
Description
1 – 4
On
Ethernet connection is established
Blinking
Send / Receive data
Off
No cable connected
Wireless
On
Wireless Link is up
Blinking
Send / Receive data
Off
Wireless signal is disabled
Internet
On
Connected to Internet
Blinking
Send / Receive data
Off
No Internet connection
Modem
On
Connected to a Ethernet Broadband Modem
Off
Not connected
Power
On
Power on, normal operation
Off
Power off or failure
Image of rear side explaining ports and buttons
‘9V
1A’ port
Connect the included power adapter to this inlet.
‘To Modem’ port
Wide area Network port.
Connect this to your broadband modem
Connect this to your broadband modem
LAN1 – LAN4 ports
10/100 Mbps Ethernet ports (RJ-45).
Connect devices on your local area network to
these ports (i.e. a PC, a Ethernet hub, or switch)
Connect devices on your local area network to
these ports (i.e. a PC, a Ethernet hub, or switch)
‘Reset’ button
Press this button for at least 5 seconds to reset the
Wireless Router to its factory default settings.
Wireless Router to its factory default settings.
WARNING: THIS WILL DELETE YOUR INTERNET
SETTINGS!
SETTINGS!
To reset the Wireless Router without losing the
configuration settings, see ‘Reset’ (see ‘Menu
Advanced Settings’).
configuration settings, see ‘Reset’ (see ‘Menu
Advanced Settings’).
LAN4
To Modem
12V=1A
Reset
LAN3
LAN2
LAN1