Verizon GT701C Manual Do Utilizador
10
DSL Modem User Manual
11
Chapter 2 Performing a Quick Setup
5b. If
PPP
o
E
was selected in step 5, select the
IP
type (“Dynamic
IP-DHCP
[Default]” or “Single Static
IP
Address”). If Single Static
IP
Address was select-
ed, enter the address in the appropriate text box.
6. Optional - Select the
DNS
type (“Dynamic
DNS
Addresses [Default]” or
“Static
DNS
Addresses”). If Static
DNS
Addresses was selected, enter the pri-
mary and secondary
DNS
addresses in the appropriate text boxes. If unsure
what to enter in this section, contact the
ISP
.
7. Click Apply at the bottom of the screen.
8. Read the instructions on the next screen. The Modem is successfully
configured.
The Power light flashes rapidly while the Modem restarts, then glows steadily
green when fully operational. The Internet light will also glow steadily green. The
Modem is now configured and users can start surfing the Internet.
If an error appears, stating the Web browser was unable to connect to the Internet,
check the configuration settings. Ensure all the information required by the
green when fully operational. The Internet light will also glow steadily green. The
Modem is now configured and users can start surfing the Internet.
If an error appears, stating the Web browser was unable to connect to the Internet,
check the configuration settings. Ensure all the information required by the
ISP
is
entered correctly.
Changing the Password
To create or change the password allowing access to the Modem’s Web
Configuration screens, follow these instructions:
Configuration screens, follow these instructions:
1. From the “Home” screen, select Quick Setup.
2. The “Welcome to the Quick Setup” screen appears. Select “Admin User Name
and Password.”