TP-LINK TL-MR3420 Folheto
Quick
Installation Guide
3G/4G Wireless N Router
TL-MR3420
TL-MR3420
7106505290 REV3.0.0
Plug and Play via 3G/4G USB Modem
Configuring your 3G/4G connection
4. Select 3G/4G Only and click Next.
5. Select your Region and Mobile ISP, then click Next.
Note: If your ISP is not listed, select the Set Dial number, APN, Username and Password
manually option and enter the 3G/4G information provided by your Internet Service
Provider (ISP).
Provider (ISP).
6. Continue to follow the Quick Setup to complete the configuration.
Note: If you change the default SSID (wireless network name) and password during the
configuration process, connect all your wireless devices with the new SSID and password.
configuration process, connect all your wireless devices with the new SSID and password.
> Refer to Plug and Play via 3G/4G USB Modem to share the Internet
through a 3G/4G USB modem.
> Refer to Connect to DSL/Cable/Satellite Modem to share the
Internet through a DSL/Cable/Satellite modem or an Ethernet cable
connection.
connection.
Get Started
Wired connection:
Connect your devices to the router's LAN (1 - 4) ports
via Ethernet cables.
Wireless connection:
Use the default SSID and password printed on the
bottom of the router to join the wireless network.
Enjoy your Internet!
USB
Power Adapter
TL-MR3420
3G/4G USB Modem
2
Plug in a 3G/4G USB modem with a
SIM/UIM card.
POWER
ON/OFF
WAN
1
2
3
4
WPS/
RESET
WIFI
1
Press to turn on the router.
3
Wait for 1
-2 minutes and check the status of the following LEDs.
Power
On
Green
Internet
On
USB
On
Wi-Fi
Tip: You can easily turn on/off the Wi-Fi as needed by pressing the Wi-Fi button
on the rear
panel
for 3 seconds.
1. Connect your device to the router’s LAN (1 - 4) port via an Ethernet cable or
use the default SSID and password printed on the bottom of the router to
join the wireless network.
join the wireless network.
2. Open a web browser, enter http://tplinkwifi.net into the address bar, use
admin for both username and password, and then click Login.
Note: If the login window does not appear, please refer to FAQ > Q3.
3. Select your Region and Time zone, then click Next.
Wired
Wireless
TL-MR3420
POWER
ON/OFF
WPS/RESET
WIFI
Follow the specific instructions in this guide to connect to the
Internet and enjoy.
Internet and enjoy.
The router can also be configured with a primary WAN and a 3G/4G
USB modem as a backup (secondary) solution to ensure "always-on"
Internet connectivity. Refer to the User Guide for detailed instructions.
USB modem as a backup (secondary) solution to ensure "always-on"
Internet connectivity. Refer to the User Guide for detailed instructions.
1. If the Internet LED ( ) is not on or is amber, please refer to
Configuring your 3G/4G
connection
below.
2. If the Wi-Fi LED ( ) is off, press the Wi-Fi button on the rear panel for 3 seconds and then
check the LED again.
Note: