Fujitsu V01 Manual Do Utilizador

Página de 138
Chapter 3  Web Operation 
IP-900 Series 
42 
Table 3-10  Operation & Status Display Items 
Item Display 
Serial number 
Displays the serial number 
IP address (IPv4) 
{DHCP/PPPoE/Static IP} 
Displays the IPv4 address acquisition mode. 
 
[xxx.xxx.xxx.xxx (IPv4)] 
Displays the IPv4 address. 
xxx.xxx.xxx.xxx: IPv4 address 
Subnetmask (IPv4) 
xxx.xxx.xxx.xxx 
Displays the IPv4 subnet mask. 
xxx.xxx.xxx.xxx: Subnet mask 
Default gateway address (IPv4) 
xxx.xxx.xxx.xxx 
Displays the default gateway address of IPv4. 
xxx.xxx.xxx.xxx: Default gateway address 
IP address (IPv6) 
Link-Local/[xxxx:xxxx: ... :xxxx(IPv6)] 
Displays the IPv6 link-local address. 
xxxx:xxxx: ... :xxxx: Link-Local address 
 
{Stateless/Static IP} 
Displays the IPv6 address acquisition method. 
* If the IPv6 address acquisition method is "Stateless," up to four sets of global 
unicast address/prefix are displayed according to the address acquisition 
status. 
 
[yyyy:yyyy: ... :(IPv6)] 
Displays the IPv6 global unicast address. 
yyyy:yyyy: ... :yyyy: Global unicast address 
 
[zzz] 
Displays the prefix of the IPv6 global unicast address. 
zzz: Prefix 
Default gateway address (IPv6) 
xxxx:xxxx: ... :xxxx 
Displays the default gateway address of IPv6. 
xxx:xxx. ... :xxx: Default gateway address 
* If the IPv6 address acquisition method is "Stateless," up to four default 
gateway addresses are displayed according to the address acquisition status. 
LAN MAC address 
Displays the MAC address. 
{Connected / Disconnected} 
Displays the LINK status. 
LAN link 
{100Base-TX Full Duplex / 100Base-TX Half Duplex / 10Base-T Full 
Duplex / 10Base-T Half Duplex} 
Displays the LAN interface operation status. 
Time server 
{Normal / Fault / Synchronization failure/ ---} 
Displays the status of synchronization with the specified time server.