Runco 1080p Manual Do Utilizador
50
Runco VX-44d/-55d Owner’s Operating Manual
PRE
L
IMINAR
Y
Auto Setup also optimizes the following settings, based on the characteristics of the
incoming signal:
incoming signal:
• Pixel Tracking
• Pixel Phase
• Size and Blanking
• Height
• Position
• White Balance (Input Levels)
If additional fine-tuning is necessary after performing an Auto Setup, continue with the
next section.
next section.
Size and Position Menu
In the Size and Position Menu, you can increase or decrease the size of your image,
change its proportion (aspect ratio), move the image to a specific area of the screen, and
refine other related parameters. Use Size and Position controls to match the image
precisely to the screen. Changes made in the Size and Position menu take effect
immediately and are saved when you exit the menu.
change its proportion (aspect ratio), move the image to a specific area of the screen, and
refine other related parameters. Use Size and Position controls to match the image
precisely to the screen. Changes made in the Size and Position menu take effect
immediately and are saved when you exit the menu.
Size Presets: Select a Size Presets option to quickly display an image in its native
resolution or to automatically resize an image to closely fill the projector’s native resolution
of 1920x1080, or to optimize the display width or height.
resolution or to automatically resize an image to closely fill the projector’s native resolution
of 1920x1080, or to optimize the display width or height.
Size, Position and Blanking parameters automatically adjust accordingly. If Blanking is set
first, which defines an Active Input Area, Size Preset scaling occurs in this region of
interest only.
first, which defines an Active Input Area, Size Preset scaling occurs in this region of
interest only.
The default setting is either No Resizing or Custom, depending on the input signal
resolution. Do not change it unless specifically instructed to do so by Runco
Technical Support.
resolution. Do not change it unless specifically instructed to do so by Runco
Technical Support.
• No Resizing: Select No Resizing to display the image in its native resolution, which
may or may not match the projector’s resolution. For example, for a computer display
with a native resolution of 800 x 600, “No Resizing” uses the central 800 x 600 pixels
and has a black border – the black border areas are unused pixels.
with a native resolution of 800 x 600, “No Resizing” uses the central 800 x 600 pixels
and has a black border – the black border areas are unused pixels.
Figure 3-19. Resize Presets: No Resizing
➤
1. Size
Presets
No
Resizing
2. Size
0.866
3. Height
1000
4. Pixel Tracking 858
5. Pixel Phase
5. Pixel Phase
0
6. Horizontal
Shift
360
7. Vertical
Shift
262
8.
Reserved
9.
Reserved
0.
Advanced
Size and Position
The “native” aspect ratio is with the primary lens only. With an
anamorphic lens in the light path, the aspect ratio is 2.35:1.
anamorphic lens in the light path, the aspect ratio is 2.35:1.
Note
1920
1080
1080
1080
1080
1920
1920
1920
SVGA 800x600
Source Type
NTSC
HDTV 720p
HDTV 1080i
No Resizing
Active
Image
Image
Area
Active
Image
Image
Area
Active
Image
Image
Area
Active
Image
Image
Area
Unused Pixels
Unused Pixels
Unused Pixels