Viewsonic A-CD-PJ502 Guia Do Utilizador
ViewSonic PJ502
26
SETUP menu
With the SETUP menu, items shown in the table below can be perormed.
Select an item using the menu cursor buttons
Select an item using the menu cursor buttons
S
/
T
, and press the menu
cursor button
X
or the ENTER button on the remote control to progress.
Then perform it referring to the following table.
Item
Description
KEYSTONE
Using the buttons
S
/
T
corrects the keystone distortion.
Upper in the data
Q
Lower in the data
* The adjustable range of this function will vary with the type of input signal. At
some signals, this function may not work well.
* When the V:INVERT or the H&V:INVERT is selected under the item MIRROR, if
* When the V:INVERT or the H&V:INVERT is selected under the item MIRROR, if
the projector screen is inclined or if the projector is angled downward, this function
may not work correctly.
* When the zoom adjustment is set to the TELE side, this correction may be
* When the zoom adjustment is set to the TELE side, this correction may be
excessive. This function should be used with zoom set to WIDE whenever possi-
ble.
WHISPER
Using the buttons
S
/
T
turns off/on the whisper mode.
NORMAL
WHISPER
* When the WHISPER is selected, acoustic noise and screen brightness are
reduced.
MIRROR
Using the buttons
S
/
T
switches the mode for mirror status.
NORMAL
H:INVERT
V:INVERT
H&V:INVERT
VOLUME
Using the buttons
S
/
T
adjusts the volume.
High
Q
Low