JVC 0809TTH-AO-AO Manual Do Utilizador

4

28

Adjusts the pattern of the projected image.
      Setting: Cinema 1, Cinema 2, Cinema 3, Natural, Stage, Dynamic, User 1, User 2, THX

Adjusts the contrast of the projected image.
      Setting: –50 to 50

Adjusts the brightness of the projected image.
      Setting: –50 to 50

Adjusts the color density of the projected image. 
      Setting: –50 to 50

Adjusts the hue of the projected image.
      Setting: –50 to 50

Sets the color temperature of the projected image.
      Setting: 5800K, 6500K, 7500K, 9300K, High Bright, Custom 1, Custom 2, Custom 3

Sets the gradation characteristics of the projected image.
      Setting: Normal, A, B, C, D, Custom 1, Custom 2, Custom 3

Adjusts the contours of the image and detailed composition of the image.
      Setting: Sharpness, NR, CTI, Color Management, Clear Motion Drive

Sets the lens aperture.
      Setting: –15 to 0

Reset the setting.

Configures HDMI input signal.
      Setting: Input, Color Space, Control with HDMI

Configures the input signal for the component video input terminals.
      Setting: Y Pb/Cb Pr/Cr, RGB, SCART

Configures the Video/S-Video input signals.
      Setting: NTSC, Setup Level, Color System

Configures PC input.
      Setting: Auto Alignment, Tracking, Phase, Picture Position

Adjusts the horizontal/vertical position of the projected image.

Configures the screen size of the projected image.
      Setting: 4:3, 16:9, Zoom

Configures the screen size of the projected image.
      Setting: Auto, 1:1, Full

When set to “On”, the projected 2.35:1 image will be stretched vertically to the panel resolution.
      Setting: On, Off

Selects whether or not to set over scan for the SD video signal.
      Setting: On, Off

Masks (Hides) the outer area of the projected image.
      Setting: 2.5, 5, Off

Selects this to view movies shot on film.

      Setting: Auto, film, Off

                     

●

 

There are items that cannot be modified 

    without entry.