Toshiba B-SA4TP SERIES Manual Do Utilizador

ENGLISH VERSION EO1-33048 

2.2 Connecting the Power Cord

E2- 2 

 

 
 
 
 
 
 
 
 
 
 

To insure the best operating environment, and to assure the safety of the 
operator and the equipment, please observe the following precautions. 
•  Operate the printer on a stable, level, operating surface in a location 

free from excessive humidity, high temperature, dust, vibration or 
direct sunlight. 

•  Keep your work environment static free.  Static discharge can cause 

damage to delicate internal components. 

•  Make sure that the printer is connected to a clean source of AC 

Power and that no other high voltage devices that may cause line 
noise interference are connected to the same mains. 

•  Assure that the printer is connected to the AC mains with a three-

prong power cable that has the proper ground (earth) connection. 

 
 
1.  Make sure that the printer Power Switch is in the OFF (

{

)

 

position. 

 

Connect the Power Cord to the printer as shown in the figure below 

 

 

 
 

2.  Plug the other end of the Power Cord into a grounded outlet as shown 

in the figure below. 

Power Cord 

Power Switch

Power Cord

Power Cord