SATO MB410i Manual Do Utilizador
63
Basic Specifications of MB400i/MB410i
Item
MB400i
MB410i
Printing method
Thermal printing
Head density
8 dots/mm (203 dpi)
12 dots/mm (305 dpi)
Maximum effective
printing area
printing area
4.09” (104 mm) [width]
× 11.69” (297 mm) [pitch]
Printing speed
Maximum 4”/sec (103 mm/sec) [printing speed is 3”/sec
(75 mm/sec)
(75 mm/sec)
during dispenser printing]. The speed dif-
fers, depending on printing duty and usage
environment.
Printing speed can be changed using the printing speed
setting command.
environment.
Printing speed can be changed using the printing speed
setting command.
Dimensions
• MB400i/410i without
rubber boot
• MB400i/410i without
rubber boot
Printer: 6.7” (170 mm) [width]
× 3” (76 mm) [depth]
×
5.3” (134 mm) [height]
Dimensions
• MB400i/410i with rub-
ber boot
• MB400i/410i with rub-
ber boot
Printer: 8” (202 mm) [width]
× 3.9” (99 mm) [depth]
×
6.5” (165 mm) [height]
Weight
• MB400i/410i without
rubber boot
• MB400i/410i without
rubber boot
1.65 lbs (750 g) or less [Standard model, including bat-
tery pack]
tery pack]
Weight
• MB400i/410i with rub-
ber boot
• MB400i/410i with rub-
ber boot
2 lbs (910 g) [Standard model, including battery pack]
Power source [battery] Pack type [lithium ion] 1700 mAh can continuously print
four rolls of thermal labels [equivalent to 164 ft (50 m)]
when fully charged [however, at a printing rate of 16% or
less].
when fully charged [however, at a printing rate of 16% or
less].