Lexmark E310 Manual Do Utilizador
![Lexmark](https://files.manualsbrain.com/attachments/878cae5fca737841ce37f41a7ee73881a8b54f60/common/fit/150/50/823435a5b9c868f91a4b7f8b99ddfd9b9c699edf1f6ff104003e82a92d7f/brand_logo.png)
2-6
Service Manual
4044-XXX
User Error Message Table
Primary User Error Message Table
When a user error message occurs the printer stops printing and
one or two operator panel LEDs are on solid or blinking until the
printer is powered off. Locate the printer’s LED Status in the
following table and take the indicated action.
one or two operator panel LEDs are on solid or blinking until the
printer is powered off. Locate the printer’s LED Status in the
following table and take the indicated action.
User Error Message
LED Status
Action
Paper Jam
Paper Jam on solid
Open cover and clear
any paper jams. Close
the top cover. If the
error message is still
present, go to
the
any paper jams. Close
the top cover. If the
error message is still
present, go to
the
Load Manual Paper/
Envelope
Envelope
Load Paper blinks and
Press Button on solid
Press Button on solid
Load media into the
manual slot and push
the operator panel
button to resume
printing one sheet or
do an operator panel
reset by pressing and
holding the operator
panel button for more
than three seconds.
manual slot and push
the operator panel
button to resume
printing one sheet or
do an operator panel
reset by pressing and
holding the operator
panel button for more
than three seconds.
Load Paper/Load
Envelope
Envelope
Load Paper on solid
and Press Button on
solid
and Press Button on
solid
Load media in the
appropriate paper tray
and push the operator
panel button to
resume printing or do
an operator panel
reset by pressing and
holding the operator
panel button for more
than three seconds.
appropriate paper tray
and push the operator
panel button to
resume printing or do
an operator panel
reset by pressing and
holding the operator
panel button for more
than three seconds.
Top Cover Open
Error on solid
Close the top cover. If
the error LED remains
on solid and POST
does not continue, go
to the
the error LED remains
on solid and POST
does not continue, go
to the